Mortier-Colle Gris Standard [ECO 300]

Use of product

• Ceramic installation with medium to high absorption
• Installation on floors and walls
• Recommended for indoor use, excluding damp areas and heated floors

Supports & Recommendations

• The surfaces must be clean and dry, free of any traces of oil
• Ideally, wait for the surfaces to harden (after 28 days)
• In vertical installation, the maximum installation thickness should not exceed 10mm in double gluing
• During application, the temperature should be between 5°C and 30°C
• It is recommended to use this mortar with a minimum thickness of 5mm and a maximum of 10mm
• In hot weather, moisten the surface to eliminate any risk of aggressive drying of the adhesive mortar

Instructions for Use

• Add 5.5 L of water per 25 kg bag
• Mix manually or using a mechanical mixer (recommended)
• Let the mortar rest for 5 to 10 minutes and mix again
• Apply the adhesive mortar with a notched trowel suitable for the size of the tile, on a surface not exceeding 2 m²
• Place your tiles and secure them by tapping with a mallet
• Ensure a minimum joint width of 1.5 mm

Packaging & Storage

• 25 kg bags on a pallet of 64 bags (Pallet = 1.6 tons)
• Storage for up to 6 months in the original packaging, protected from sunlight, weather, and humidity

Health and safety

The chemical composition of the cement is in full compliance with sanitary epidemiological regimen in terms of harmful substances requiring the quality of the given building material. When working with cement it is necessary to avoid contact with the eyes and skin, do not inhale dust and use appropriate protective clothing, gloves, eyes and face protectors.