PT16 Lightweight Plaster-Based Coating B5

Unique Properties

• High performance: Less sensitive to various substrates.
• Setting time: Consistent.
• Aesthetic: Its whiteness provides an optimal finish.
• Higher yield: Easier and faster to apply.
• PT16 is made from infinitely recyclable natural gypsum. The components have been carefully selected to minimize the impact on the environment and health.

Intended Use

Interior: walls and ceilings Applicable on various substrates: smooth-faced bricks, plaster blocks, smooth concrete, aerated concrete, and standard gypsum boards (vertical structures) under certain conditions

Application

• 1 - Mixing: Pour the contents of the mortar bag into a clean and pre-adjusted machine.
• 2 - Angle reinforcement: Place a bead against the reference rule to reinforce the angle.
• 3 - Projection: Spray the mixture (automatically mixed in the machine) while keeping the lance 20 cm from the surface to ensure consistent application.
• 4 - Leveling: Once the mortar is in place, level using a rule horizontally and then vertically to ensure the flatness of the substrate.
• 5 - Tightening/cutting: Using a plasterer's knife, tighten the plaster to fill imperfections, then cut the product with the same tool to remove surface defects..
• 6 - Smoothing: Smooth with the finishing plaster to obtain a straight and perfectly smooth surface.

Usage Tips

• Spray plaster is intended for interior use only.
• Modifying the water/plaster ratio, using a dirty or poorly adjusted machine, not respecting the setting time, or adding additives will affect the product's performance.
• PT16 should be stored in a moisture-free area.

Packaging & Storage

• PT16 spray plaster is sold in 30 kg bags.
• Shelf life: 6 months.
• Store in a dry place, preferably on wooden pallets, and protect against moisture. The product's quality remains constant for an extended period when stored properly.